Type MV-105 Cable

Live Chat Ask A Question View Spec Sheet

Application:

For use in aerial, direct burial, cable tray, conduit, and underground duct installations as permitted by the National Electric Code. The cable is capable of operating continuously with a conductor temperature not to exceed 1050C for normal operation, 1400C for emergency overload conditions, and 2500C for short circuit conditions. It is rated at 15,000V

with 133% insulation level (ungrounded system). Maximum sidewall pressure is 1000 lbs. This cable does not require the use of pulling lubricant.

Conductor

8000 series aluminum compact conductor in accordance with ASTM specs B800and B801 and ICEA part 2, Section 2.1 and 2.5.

Insulation

Ethylene propylene rubber (EPR) with a nominal thickness of 0.220

Insulation Shield

Extruded layer of semi-conducting thermosetting material which shall be identified as being semi- conducting. Over this layer will be applied a helically wrapped 5-mil copper tape with 25% overlap.

Jacket

Sunlight resistant PVC per ICEA S-97-682, with average thickness in accordance to Table 7-3 of ICEA.

Flame Tests

UL 1685 – 1/0 and larger, UL-CT Flame Exposure Test

Additional Standards

UL 1685 – 1/0 and larger, UL-CT Flame Exposure Test
UL 1072 – Medium Voltage Power Cables
ICEA S-93-639 (NEMA WC74) – S=46kV Shielded Power Cable fo use in Transmission and Distribution of Electrical Energy

Browse Type MV-105 Cable Products

Products
>
Products
>
Aluminum 15kV MV 105

Aluminum 15kV MV 105

For use in aerial, direct burial, cable tray, conduit, and underground duct installations as permitted by the National Electric Code. The cable is capable of operating continuously with a conductor temperature not to exceed 105°C for normal operation, 140°C for emergency overload conditions, and 250°C for short circuit conditions. It is rated at 15,000V with 133% insulation level (ungrounded system). Maximum sidewall pressure is 1000 lbs. This cable does not require the use of pulling lubricant.

Loading products...