Share This Page

HW173: 600V Shielded Substation Cable, XLP XHHW-2, LSZH (14-10 AWG)

Application

LifeGuard™ Low Smoke Zero Halogen* cable is for use in power, control and lighting circuits in a broad range of utility substation applications where shielding from ambient electrical interference is required. LifeGuard™ jacket is highly flame retardant, produces very small amounts of smoke when burned and contains no halogens. LifeGuard™ cable is ideal for applications where a high degree of safety and equipment protection is required. LifeGuard™ cable is UL listed as Type TC-LS and approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays and direct burial in circuits not exceeding 600 volts. It may be installed in temperatures as low as -30°C and used in NEC Class I and II, Division 2 hazardous locations. It is UL approved for continuous operation at 90°C in wet and dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.

Color Code

  • ICEA Method 1, Table E-1

Overall Shield

  • Longitudinally applied 5 mil corrugated copper tape shield

Conductors

  • Tin coated soft annealed copper per ASTM B-33, Class B stranding per ASTM B-8

Insulation

  • Cross-linked polyethylene (XLP) per UL Standard 44 for Type XHHW-2 conductors

Jacket

  • Sunlight-resistant and flame-retardant, Low Smoke Zero Halogen polyolefin per UL Standard 1277. A ripcord is applied longitudinally under the jacket to facilitate stripping

Additional Standards

  • NEC Type TC per articles 336, 392, and 501.4 (b) and Class 1 circuits per NEC article 725

* Some cable insulations may contain trace amounts of halogens.

Flame Tests

  • FM Approved - Class 3972 Specification Test Standard - Cable Fire Propagation Group 1
  • UL Standard 1581 (70,000 BTU/hr) Flame Test
  • IEEE 383 (70,000 BTU/hr) Flame Test
  • ICEA T-29-520 (210,000 BTU/hr) Flame Test
  • IEEE 1202/CSA FT4 (70,000 BTU/hr) Flame Test
  • UL Standard 1685 (70,000 BTU/hr) Flame Propagation and Smoke Release Test
  • Flame Test listings may vary by cable size

Browse HW173: 600V Shielded Substation Cable, XLP XHHW-2, LSZH (14-10 AWG) Products

  • Products
  • >
  • Products
  • >
  • HW173: 600V Shielded Substation Cable, XLP XHHW-2, LSZH (14-10 AWG)

HW173: 600V Shielded Substation Cable, XLP XHHW-2, LSZH (14-10 AWG)

LifeGuard™ Low Smoke Zero Halogen* cable is for use in power, control and lighting circuits in a broad range of utility substation applications where shielding from ambient electrical interference is required. LifeGuard™ jacket is highly flame retardant, produces very small amounts of smoke when burned and contains no halogens. LifeGuard™ cable is ideal for applications where a high degree of safety and equipment protection is required.

LifeGuard™ cable is UL listed as Type TC-LS and approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays and direct burial in circuits not exceeding 600 volts. It may be installed in temperatures as low as -30°C and used in NEC Class I and II, Division 2 hazardous locations. It is UL approved for continuous operation at 90°C in wet and dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.

Loading products...

HWC also specializes in hard-to-find specialty items. The HWC team is always concerned with filling customers' orders as properly and efficiently as possible. And if it's not in stock, HWC will get it- no problem! Get A Quote

Ask Us A Question Or Leave Us A Comment

Industries We Serve

With over 30,000 products sold annually, Houston Wire & Cable provides its customers with knowledgeable market and product application experts, standard same-day shipments, 99.99% order accuracy and on-time delivery, and 24/7/365 service.

Choose...