Share This Page

HW307

Application:

For use in harsh environments where maximum conductor protection is required. Impervious armor prevents the entrance of water, gas and corrosive elements into the electrical core. Used for power, control and lighting circuits in a broad range of commercial and industrial pulp and paper, mining, and petroleum applications. Approved for use in wet or dry locations at 90°C, installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts. UL listed, Type MC-HL per UL Standard 2225 for use in Class I, Division I hazardous locations. National Electric Code approved for use at 90°C for continuous operation, 130°C for emergency overload conditions, and 250°C for short circuit conditions. Impervious continuously welded and corrugated aluminum armor cable is recommended as an economical alternative to wire in conduit systems. Listed as Type TC-ER per UL Standard.

 

Conductors

  • Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8

Insulation

  • Cross-linked polyethylene (XLP) per ICEA S-95-658 and UL Standard 44 for Type XHHW-2 conductors

Grounding Conductor

  • Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 sized in accordance with NEC requirements

Armor

  • Impervious continuously welded and corrugated aluminum

Jacket

  • Black flame-retardant and sunlight resistant PVC

Color Code

  • ICEA Method 1, Table E-2

Additional Standards

  • UL listed Type CWCMC to IEEE 45/IEEE 1580 (46 CFR Part 111.60-23) Marine Shipboard Cable
  • Meets requirements of CSA-C22.2 No. 0.3, -40°C cold impact test

Flame Tests

  • UL 1685
  • ICEA T-29-520 (210,000 BTU/hr) Flame Test
  • IEEE 383 (70,000 BTU/hr) Flame Test
  • IEEE 1202 Flame Test
  • ICEA T-29-520 (210,000 BTU/hr) Flame Test
    IEC 332-3 Category A fire test
  • CSA FT4

Connectors

  • Explosion Proof, Class I Division 1: 424MA series – all nickel-plated aluminum
  • Rain Tight: 416MC series – all nickel-plated brass

Browse HW307 Products

HW307: 600V CCW Power & Control Cable, Type MC-HL

For use in harsh environments where maximum conductor protection is required. Impervious armor prevents the entrance of water, gas and corrosive elements into the electrical core. Used for power, control and lighting circuits in a broad range of commercial and industrial pulp and paper, mining, and petroleum applications.

Approved for use in wet or dry locations at 90°C, installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts. UL listed, Type MC-HL per UL Standard 2225 for use in Class I, Division I hazardous locations. National Electric Code approved for use at 90°C for continuous operation, 130°C for emergency overload conditions, and 250°C for short circuit conditions. Impervious continuously welded and corrugated aluminum armor cable is recommended as an economical alternative to wire in conduit systems. Listed as Type TC-ER per UL Standard

Loading products...

HWC also specializes in hard-to-find specialty items. The HWC team is always concerned with filling customers' orders as properly and efficiently as possible. And if it's not in stock, HWC will get it- no problem! Get A Quote

Ask Us A Question Or Leave Us A Comment

Industries We Serve

With over 30,000 products sold annually, Houston Wire & Cable provides its customers with knowledgeable market and product application experts, standard same-day shipments, 99.99% order accuracy and on-time delivery, and 24/7/365 service.

Choose...